See Our Work
ClassicClassic

Pool Startup & Your First 30 Days

The first month sets up your finish for decades. Here’s what happens, what you do, and what you definitely don’t do (looking at you, cannonball contest on day one).

Timeline

Startup, day by day

Exact timing depends on your finish, size and the weather. We’ll walk you through all of it in person, so no need to memorize anything.

1

Days 1–2: Fill

We fill the pool without stopping, so the finish doesn’t get a ring. Please don’t turn the hose off, even if the neighbors stare.

2

Day 2–3: Startup

We start the equipment, balance the water and walk you through the controls. Bring your questions! This is your startup date.

3

Days 1–14: Brush daily

Brush the entire pool twice a day for the first two weeks to remove plaster dust. It’s great for the arms.

4

Days 1–14: No cleaner, no heat

Your robot cleaner and heater get a short vacation. Leave them off until we give the OK.

5

Day 30: Salt, if you have it

Fresh finishes need to cure, so salt pools start on chlorine and get salt after about 30 days.

6

Day 30+: Normal life

Your pool service partner takes it from here. Swim, splash, repeat.

Shopping list

Supplies to have on hand

  • Test kit or test strips (chlorine, pH, alkalinity, calcium)
  • Stainless steel or nylon brush, as your finish requires
  • Telescoping pole and leaf skimmer
  • Chlorine tablets and a floater or in-line feeder
  • Startup chemicals, as your pool service partner recommends
  • A shady spot and a cold drink for the brushing sessions
Protect your finish

Startup do’s and don’ts

Can we swim right away?

Almost! Usually within a few days of startup, once the water chemistry is balanced. Your project manager will give you the official green light (and maybe score your first cannonball).

Can the dog swim?

Not for the first 30 days. Claws and a curing finish are not friends.

Can I add salt early?

No. Wait about 30 days so the finish can cure.

The water looks cloudy. Is something wrong?

Totally normal at first. That’s plaster dust settling. Keep brushing and running the filter. Still cloudy after a week? Send us a claim and we’ll take a look.

What voids the warranty during startup?

A new finish is a little delicate at first. Skipping brushing, letting the chemistry swing, or using the wrong chemicals can damage it. Your warranty document has the details, and we’re always a phone call away if you’re unsure.

Questions during startup?

Call us. Startup questions are the best kind, because they’re cheap to fix.